Germany
CHASERVO DS06 – 7.4 mm DS servo, 2 kg
CHASERVO DS06 – 7.4 mm DS servo, 2 kg
Product.Nr. CHA-DS06
product description
CHASERVO DS06 – 7.4 mm DS servo, 2 kg
The CHASERVO DS06 is a 7.4 mm thin DS servo with Coreless DC (hollow cup) motor, aluminium case and metal gears. At 7.4 V it delivers 2.00 kg·cm holding torque (1.8 kg·cm output torque) and moves 60° in 0.07 s – weighing only 6.1 g.
- Voltage range 3.3 – 9.0 V – runs directly on a 2s LiPo (HV), no regulator needed.
- Holding torque 0.90 kg·cm @ 3.5 V · 1.65 kg·cm @ 6 V · 2.00 kg·cm @ 8.4 V.
- Speed 0.12 s/60° @ 3.4 V · 0.08 s/60° @ 6 V · 0.07 s/60° @ 8.4 V.
- Precision potentiometer as position sensor.
- Output spline 15T, 4 mm – matching CHASERVO aluminium arms see below.
- Programmable: centre, end points, direction and soft start with the CHASERVO Programming Tool (see accessories).
Applications
A wing servo for gliders, power models and jets up to about 3 m span: ailerons, camber and landing flaps, but also elevator and rudder on compact models. The H version is intended for flat installation in thin wings.
Technical data
| Version | DS06 |
| Rated voltage | DC 7.4 V |
| Voltage range | DC 3.3 – 9.0 V |
| Output spline | 15T, 4 mm |
| Case material | High Quality Technopolymer |
| Gear material | Hardened Steel + Plastic |
| Position sensor | Potentiometer |
| Motor | Coreless DC (hollow cup) |
| Operating frequency | 1520 µs / 20 kHz |
| Pulse width | 900 µs – 2100 µs |
| Programmable | Yes |
| Dimensions | 20 x 7.4 x 18.7 mm |
| Weight | 6.1 g |
| Holding Torque | 0.90 kg·cm @ 3.5 V · 1.65 kg·cm @ 6 V · 2.00 kg·cm @ 8.4 V |
| Output Torque | 0.8 kg·cm @ 3.5 V · 1.5 kg·cm @ 6 V · 1.8 kg·cm @ 8.4 V |
| No-load Speed | 0.12 s/60° @ 3.4 V · 0.08 s/60° @ 6 V · 0.07 s/60° @ 8.4 V |
| max. Current | 0.30 A @ 3.5 V · 0.58 A @ 6 V · 0.67 A @ 8.4 V |
Scope of delivery
Servo incl. cable, adapter for flat installation, plastic servo arm, mounting hardware.
Matching accessories
- CHASERVO gear set DS06
- Aluminium servo arms 15T/4 mm: servo arm 0415.04 DLG/F3K, servo arm 0415.13
- CHASERVO Programming Tool #5 for programming
Manufacturer data sheet as PDF in the downloads. Ships within one week.
Downloads
| file | file size |
|---|---|
| product_saftey_information_accessories.pdf (2.63 MB) | 2.63 MB |
| produktsicheheitshinweis_Zubehoer.pdf (2.63 MB) | 2.63 MB |
| CHASERVO_DS06_Datenblatt.pdf (0.66 MB) | 0.66 MB |
Manufacturer identification
Manufacturer identification
Name: AKATJA GmbHE-Mail adress: info@akatja.de
Streetaddress: Burgwaldring 13
ZIP Code: 86697
City: Oberhausen
Country: DE
Phone: +49 (0) 8431 4328050
