Germany
CHASERVO DS09 – 9 mm DS servo, 9 kg
CHASERVO DS09 – 9 mm DS servo, 9 kg
Product.Nr. CHA-DS09
product description
CHASERVO DS09 – 9 mm DS servo, 9 kg
The CHASERVO DS09 is a 9 mm thin DS servo with Coreless DC (hollow cup) motor, aluminium case and metal gears. At 7.4 V it delivers 8.0 kg·cm holding torque (6.0 kg·cm output torque) and moves 60° in 0.11 s – weighing only 12 g.
- Voltage range 3.3 – 9.0 V – runs directly on a 2s LiPo (HV), no regulator needed.
- Holding torque 7.0 kg·cm @ 6 V · 8.0 kg·cm @ 7.4 V · 9.0 kg·cm @ 8.4 V.
- Speed 0.13 s/60° @ 6 V · 0.11 s/60° @ 7.4 V · 0.10 s/60° @ 8.4 V.
- Precision potentiometer as position sensor. 2 ball bearings.
- Output spline 25T, 5 mm – matching CHASERVO aluminium arms see below.
- Programmable: centre, end points, direction and soft start with the CHASERVO Programming Tool (see accessories).
Applications
A wing servo for gliders, power models and jets up to about 3 m span: ailerons, camber and landing flaps, but also elevator and rudder on compact models. The H version is intended for flat installation in thin wings.
Technical data
| Version | DS09 |
| Dimensions | 23.5 x 9 x 27.5 mm |
| Weight | 12 g |
| Rated voltage | DC 7.4 V |
| Voltage range | DC 3.3 – 9.0 V |
| Output spline | 25T, 5 mm |
| Case material | High Quality Technopolymer and Aluminium |
| Gear material | Hardened Steel + Brass |
| Ball bearings | 2 ball bearings |
| Position sensor | Potentiometer |
| Motor | Coreless DC (hollow cup) |
| Operating frequency | 1520 µs / 20 kHz |
| Pulse width | 900 µs – 2100 µs |
| Programmable | Yes |
| Holding Torque | 7.0 kg·cm @ 6 V · 8.0 kg·cm @ 7.4 V · 9.0 kg·cm @ 8.4 V |
| Output Torque | 5.0 kg·cm @ 6 V · 6.0 kg·cm @ 7.4 V · 6.5 kg·cm @ 8.4 V |
| No-load Speed | 0.13 s/60° @ 6 V · 0.11 s/60° @ 7.4 V · 0.10 s/60° @ 8.4 V |
| max. Current | 0.90 A @ 6 V · 1.15 A @ 7.4 V · 1.25 A @ 8.4 V |
Scope of delivery
Servo incl. cable, adapter for flat installation, plastic servo arm, mounting hardware.
Matching accessories
- CHASERVO gear set DS09
- Aluminium servo arms 25T/5 mm: servo arm 0525.20, servo arm 25T-5 red
- CHASERVO Programming Tool #5 for programming
Manufacturer data sheet as PDF in the downloads. Ships within one week.
Downloads
| file | file size |
|---|---|
| product_saftey_information_accessories.pdf (2.63 MB) | 2.63 MB |
| produktsicheheitshinweis_Zubehoer.pdf (2.63 MB) | 2.63 MB |
| CHASERVO_DS09_Datenblatt.pdf (0.65 MB) | 0.65 MB |
Manufacturer identification
Manufacturer identification
Name: AKATJA GmbHE-Mail adress: info@akatja.de
Streetaddress: Burgwaldring 13
ZIP Code: 86697
City: Oberhausen
Country: DE
Phone: +49 (0) 8431 4328050
