Germany
CHASERVO HV95 – 9.5 mm HV servo, 11.5 kg
CHASERVO HV95 – 9.5 mm HV servo, 11.5 kg
Product.Nr. CHA-HV95
product description
CHASERVO HV95 – 9.5 mm HV servo, 11.5 kg
The CHASERVO HV95 is a 9.5 mm thin HV servo (high voltage) with Coreless DC motor, aluminium case and metal gears. At 7.4 V it delivers 10.5 kg·cm holding torque (9.3 kg·cm output torque) and moves 60° in 0.15 s – weighing only 21.7 g.
- Voltage range 4.8 – 8.4 V – runs directly on a 2s LiPo (HV), no regulator needed.
- Holding torque 8.5 kg·cm @ 6 V · 10.5 kg·cm @ 7.4 V · 11.5 kg·cm @ 8.4 V.
- Speed 0.17 s/60° @ 6 V · 0.15 s/60° @ 7.4 V · 0.12 s/60° @ 8.4 V.
- Precision potentiometer as position sensor. 2 ball bearings.
- Output spline 25T, 6 mm – matching CHASERVO aluminium arms see below.
- Programmable: centre, end points, direction and soft start with the CHASERVO Programming Tool (see accessories).
Applications
A wing servo for gliders, power models and jets up to about 3 m span: ailerons, camber and landing flaps, but also elevator and rudder on compact models. The H version is intended for flat installation in thin wings.
Technical data
| Dimensions | 30 x 9.5 x 33.5 mm |
| Weight | 21.7 g |
| Output spline | 25T, 6 mm |
| Rated voltage | DC 7.4 V |
| Voltage range | DC 4.8 – 8.4 V |
| Case material | Aluminium |
| Gear material | Metal gears |
| Ball bearings | 2 ball bearings |
| Position sensor | Potentiometer |
| Motor | Coreless DC |
| Operating frequency | 1520 µs / 333 Hz |
| Pulse width | 500 µs – 2500 µs |
| Programmable | Yes |
| Holding Torque | 8.5 kg·cm @ 6 V · 10.5 kg·cm @ 7.4 V · 11.5 kg·cm @ 8.4 V |
| Output Torque | 7.5 kg·cm @ 6 V · 9.3 kg·cm @ 7.4 V · 10.2 kg·cm @ 8.4 V |
| No-load Speed | 0.17 s/60° @ 6 V · 0.15 s/60° @ 7.4 V · 0.12 s/60° @ 8.4 V |
| max. Current | 1.16 A @ 6 V · 1.32 A @ 7.4 V · 1.58 A @ 8.4 V |
Scope of delivery
Servo incl. cable, plastic servo arm, mounting hardware.
Matching accessories
- CHASERVO gear set HV95
- Aluminium servo arms 25T/6 mm: servo arm 0625.0T red, servo arm 0625.11, servo arm 0625.23, servo arm 0625.23T, servo arm 0625.25T red, servo arm 0625.32, servo arm 0625.38, servo arm 0625.40, servo arm 0625.50, servo arm 0625.60, servo arm 25T-6B, servo arm 25T-6C, servo disc 0625.6D, double arm 0625.25T, double arm 0625.45 red with offset
- CHASERVO Programming Tool #5 for programming
Other versions: CHASERVO HV95H
Manufacturer data sheet as PDF in the downloads. Ships within one week.
Downloads
| file | file size |
|---|---|
| product_saftey_information_accessories.pdf (2.63 MB) | 2.63 MB |
| produktsicheheitshinweis_Zubehoer.pdf (2.63 MB) | 2.63 MB |
| CHASERVO_HV95_Datenblatt.pdf (0.67 MB) | 0.67 MB |
Manufacturer identification
Manufacturer identification
Name: AKATJA GmbHE-Mail adress: info@akatja.de
Streetaddress: Burgwaldring 13
ZIP Code: 86697
City: Oberhausen
Country: DE
Phone: +49 (0) 8431 4328050
